After fighting a low battery almost every time I went to start my Power King I decided to see what it would take to install an alternator on the tractor. I found a used Delco alternator and started figuring out how to rig it to the tractor. At first I had a link belt on the alternator, but after a year it started coming apart. On this tractor it is neccessary to pull the engine and cluch in order to install a belt on the middle pulleys. The middle cluch pulley assembly has (3) pulleys to use for different equipment. One of my pulleys is used to drive the hydraulic pump. I am using the other for the alternator leaving the other for what every else I may need to drive in the future. 
My Dad had tried installing one in the past and had already built a bracket that was almost in the right location. I searched the Internet to find instructions on how to install an alternator on an antique tractor and did not come up with much. So I figured it out my self. My alternator is a self exciting alternator, which means that I have to get the engine RPM's up pretty high before it begins creating a charge to the system. After you excite it on start up you can throttle down and the alternator will continue to work. As I begin re-wiring the tractor, I will detail how and why I hooked it up. I will try to make some videos demonstrating how the charging system works.
This is an updated wiring diagram of how I hooked up my electrical system to work with the Delco Alternator. I went to my local Radio Shack store and got a few Rectifying Diodes that worked great.
